Industrial respiratory protection
Integrated Respiratory Protection Solutions for Safer Operations
CleanroomLink helps manufacturing, pharmaceutical, and cleanroom teams source certified respiratory protection for particulate, dust, aerosol, organic vapor, and other airborne contamination risks.
Consolidate masks, filters, cartridges, and related PPE through one sourcing partner while maintaining compatibility, compliance, traceability, and cost control.
3
Core hazard categories
NIOSH
EN and GB standards supported
Start with the hazard
Assessing respiratory hazards in manufacturing
Correct selection begins with identifying the specific airborne risks present in your facility. Choosing equipment without a clear hazard assessment can create unnecessary cost or leave workers exposed.
Particulates
Dust, mists, fumes, and smoke generated by grinding, welding, or material handling.
Aerosols
Bio-aerosols and fine airborne particles found in pharmaceutical cleanrooms and food processing environments.
Gases and vapors
Organic vapors, acidic gases, and chemical byproducts requiring chemical-specific filtration.
Product portfolio
Protection matched to your operating environment
Our supply chain partners provide disposable and reusable respiratory equipment selected around the hazard, required standard, service life, and user fit.
Single-shift protection
Disposable filtering facepiece respirators
Designed for environments where particulate filtration is required and the respirator is replaced after use or a single shift.
- ●N95 / KN95: particulate protection for general industrial and medical applications.
- ●FFP2 / FFP3: European-standard respirators, with FFP3 offering higher filtration efficiency for hazardous dust and biological aerosols.
Long-term protection
Reusable respirators and filter systems
Reusable facepieces support extended use and can be configured for particulate filtration or chemical-specific gas and vapor protection.
- ●Half-face respirators: cover the nose and mouth for many industrial tasks.
- ●Full-face respirators: add eye protection for high-concentration chemical environments.
- ●Filter cartridges and filter pads: interchangeable options for organic vapors, acid gases, and particulate pre-filtration.
Selection matrix
Respiratory protection selection guide
Use the matrix as an initial sourcing reference. A site-specific risk assessment is required before final equipment selection.
| Contaminant type | Risk level | Filtration requirement | Recommended type | Filter / standard | Reusable |
|---|---|---|---|---|---|
| Non-toxic dust | Low | Particulate | Dust mask | N95 / FFP1 | No |
| Fine dust and mists | Medium | Particulate | Half-mask respirator | N95 / FFP2 | Yes |
| Hazardous aerosols | High | High particulate | Half- or full-mask respirator | N100 / FFP3 | Yes |
| Organic vapors | Variable | Chemical | Half- or full-mask respirator | A1 / A2 cartridge | Yes |
| Acid gases | Variable | Chemical | Half- or full-mask respirator | E1 / E2 cartridge | Yes |
| Welding fumes | High | Particulate + ozone | Half-mask respirator | P100 / FFP3 | Yes |
Compliance support
Documentation built for procurement, QA, and EHS teams
We provide test reports and certificates of conformity with every order to support audits, traceability, and internal approval processes.
EN standards
EN 149 for FFP masks and EN 140/143 for reusable respirators and filters in European markets.
NIOSH standards
US requirements including 42 CFR Part 84 for N95 and P100 series equipment.
GB standards
GB 2626-compliant solutions for facilities operating in Asia.
Protection performance
The right filter only works with the right fit and system
Respiratory protection depends on more than the printed filter rating. We help teams address the three operational controls that determine whether equipment performs as intended.
01
Fit testing
A respirator works only when it forms a proper seal against the user’s face. We provide guidance on facepieces for different facial structures to minimize leakage.
02
Filter and mask compatibility
Using a filter from one brand on another respirator can cause failure. We source integrated systems with secure cartridge locks and effective seals.
03
Service life management
We assist with replacement planning based on concentration levels and usage time, helping prevent the use of saturated filters.
The CleanroomLink sourcing advantage
One partner for a more consistent PPE supply chain
Instead of coordinating multiple distributors, consolidate respiratory masks, filters, cartridges, and other cleanroom PPE through an integrated sourcing model.
Consolidated procurement
Source respiratory and cleanroom PPE through a single partner.
Standardized quality
Pre-shipment inspections verify products match the agreed specifications.
Scalable solutions
Support both large-facility supply programs and specialized pilot projects.
Request a quote
Share your respiratory protection requirements
Send your specifications and our procurement support team will recommend a compliant, compatible, and cost-effective solution for your facility.
Email:
Office:
For an accurate recommendation, include:
- Contaminant type, such as dust, vapor, or gas
- Required standard, such as NIOSH N95, EN FFP3, or GB 2626
- Operating environment, such as cleanroom, welding shop, or laboratory
- Estimated monthly or annual quantity
Connect with procurement support
Tell us about your hazards, users, standards, and expected volumes.