Cleanroom contamination control
Washable Sticky Mats for Industrial Cleanroom Environments
In high-stakes manufacturing environments, production-area integrity depends on reliable contamination control. CleanroomLink supplies washable sticky mats for heavy-duty traffic, offering a sustainable alternative to traditional peel-off adhesive pads.
Our procurement approach starts with a transparent evidence chain: verified material composition, batch traceability, standardized test reports, product identification, and protective packaging aligned with your facility’s cleanliness protocol.
Batch-linked
Documentation support
Reusable
Designed for repeated cleaning
Specification Map
Understand the construction before approving the supplier
Unlike disposable adhesive layers, these washable mats use a specialized polymer surface engineered to capture particles without transferring tack to shoes or wheels.
Core material
High-density, anti-static polymer compound selected according to the required model and environment.
Micro-tack surface
An engineered texture supports particle capture while minimizing tack transfer to footwear and wheels.
Heavy-duty backing
A non-slip base helps the mat remain stationary during frequent pedestrian, trolley, and cart traffic.
Cleaning mechanism
Designed for water and cleanroom-approved detergents while maintaining surface tackiness over repeated cycles.
Performance Specs
Measure the indicators that affect cleanroom risk
A credible washable sticky mat supplier should explain how the product behaves in your process, not only provide a generic product description.
Particle retention
The polymer surface is designed to hold sub-micron particles until the cleaning cycle. Confirm the required test method and model during RFQ.
Low residue profile
Low outgassing and ion residue are important in electronics and semiconductor environments. Batch-specific supporting data is available on request.
Surface conductivity
An anti-static variant is available for ESD-sensitive areas. Confirm surface resistivity and grounding-path requirements before deployment.
Cleaning durability
Compatibility should be checked against IPA, deionized water, and specialized cleanroom detergents used at your facility.
Dimensional Specs
Configure the mat around your traffic pattern
Washable mats can be specified for entryways, gowning rooms, material transfer airlocks, and other controlled transitions. Final dimensions and construction should be confirmed against traffic, cart loading, and floor conditions.
Common sizes
24" × 36"
36" × 48"
Thickness
3 mm–6 mm
Model dependent
Color coding
Blue, grey, white
Zone differentiation
RFQ planning note
Custom-linked modular configurations are available
Share your doorway width, cleanroom classification, wheeled-traffic profile, preferred color, and cleaning process. We can then confirm the suitable dimensions, thickness, packaging, and documentation route.
Discuss a Custom ConfigurationApplication Risks
Choose the cleaning model that matches your contamination risk
Washable sticky mats
A strong fit for high-traffic areas where peel-off layers create excessive waste and frequent removal work. They can support a lower total cost of ownership over 12+ months when maintained correctly.
Peel-off adhesive mats
Often better suited to low-traffic or high-contamination-risk areas where immediate removal of the captured debris is required to reset the surface.
Maintenance boundary
A washable mat requires a strict maintenance schedule. If it is not cleaned according to protocol, the surface may become a cross-contamination source rather than a control measure.
Parameter Table
Technical specifications for a documented purchase
The values below reflect the available product information. Exact specifications are model-dependent and should be verified through batch-specific COA documentation during the RFQ stage.
| Parameter | Specification details | RFQ confirmation |
|---|---|---|
| Material | Proprietary anti-static polymer | Confirm model and composition |
| Basis weight / thickness | Thickness: 3 mm–6 mm, model dependent; basis weight: To Be Confirmed | Confirm selected model |
| Dimensions | Commonly 24" × 36" or 36" × 48"; custom-linked modular configurations available | Confirm custom size and layout |
| Particle release | Low; ISO Class 5–7 compatible subject to model verification | Request test report |
| Fiber release | Zero; solid non-woven-free surface | Confirm batch evidence |
| Absorbency | Not designed as an absorbent mat | To Be Confirmed for process needs |
| Ion residue | Available on request; batch specific | Request data for electronics use |
| Solvent compatibility | IPA, DI water, and neutral detergents | Confirm exposure list |
| Sterility | Not stated as sterile | Sterility requirement to be confirmed |
| Pre-wetted status | Not pre-wetted | Confirm if a special configuration is required |
| Cleanliness grade | ISO Class 5–7 compatible, model dependent | Match facility class and test method |
| Packaging | Industrial protective film and reinforced crating | Confirm packaging cleanliness level |
| ESD properties | Anti-static surface, 107–109 Ω | Request surface resistivity report |
Specific ISO 13997 or ASTM compliance reports should be requested during inquiry so the evidence matches your industry and internal validation requirements.
Compliance Specs
Documentation is part of the product
CleanroomLink supports QA, EHS, engineering, and purchasing teams with evidence designed for technical review and supplier qualification.
Full traceability
Shipment documentation is linked to the production batch where applicable.
Certification alignment
Products can be sourced against target ISO, CE, or GB requirements, subject to model and document verification.
Raw test data
Test reports and third-party sampling support are available when required for facility validation.
Customization
Build the RFQ around your operating conditions
For custom or wholesale purchasing, provide the details below so the washable sticky mat manufacturer can return a relevant specification package rather than a generic quotation.
Facility profile
ISO grade, zones, doorway dimensions, and traffic frequency.
Chemical exposure
IPA, DI water, detergents, and any other cleaning agents.
Product configuration
Size, thickness, color, modular linking, and ESD requirements.
Commercial scope
Sample needs, annual volume, packaging, delivery region, and wholesale schedule.
Use Cases
Where washable sticky mats fit best
Select the configuration according to contamination risk, traffic pattern, cleaning protocol, and required supporting documentation.
Gowning rooms
Create a reusable transition point between personnel preparation areas and controlled production zones.
Entryways and airlocks
Support particle capture at high-frequency transitions where peel-off replacement creates operational waste.
Material transfer areas
Specify heavy-duty backing and suitable dimensions for carts, wheels, and repeated material movement.
FAQ
Answers for technical and purchasing teams
What is the recommended cleaning frequency?
It depends on foot traffic and room classification. Daily cleaning is typically required in Class 7–8 environments, but your approved facility protocol should determine the final schedule.
Are these mats compatible with ESD-sensitive areas?
Yes, when the anti-static variant is selected. Verify the surface resistivity report and any integrated grounding-path requirement before deployment.
How do I confirm compatibility with my facility?
Provide your ISO grade, chemical exposure list, cleaning procedure, and target application. The suitable model and corresponding test reports can then be reviewed.
When should the mat be maintained or replaced?
Maintenance depends on traffic and contamination loading. Clean it according to protocol and replace it when tack, dimensional stability, or documented performance no longer meets your acceptance criteria.
Can I receive a sample for evaluation?
Yes. Technical teams are encouraged to test samples for chemical compatibility, tackiness, particle retention, and cleaning behavior under real operating conditions.
What documents are available for batch purchasing?
Available documentation may include batch traceability, COA information, test reports, packaging details, and third-party sampling support. Confirm the required document set during RFQ.
Request Datasheet & Quote
Ask for Technical Datasheet & Pricing
Simplify procurement by sourcing validated cleanroom supplies through a single, compliant channel. Whether you are upgrading an existing facility or building a new production line, share your technical requirements for a tailored quotation and relevant datasheets.
Include in your inquiry
- ISO classification and application area
- Required dimensions and quantity
- Cleaning chemicals and ESD needs
- Target standards and documents